PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2768D
2768D ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.6250 INCHES NOMINAL IN, cone_width: 0.7710 INCHES NOMINAL IN, bore_diameter: 1.3750 INCHES NOMINAL IN, overall_width: 0.7813 INCHES NOMINAL IN, standout_width: 0.1563 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6001, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2768D
NSN: 3110-00-100-6001
FSC: 3110
CAGE: 72260 — CORBITT CO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.6250 INCHES NOMINAL IN
cone_width0.7710 INCHES NOMINAL IN
bore_diameter1.3750 INCHES NOMINAL IN
overall_width0.7813 INCHES NOMINAL IN
standout_width0.1563 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.1250 INCHES NOMINAL IN
overall_outside_diameter2.7170 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-6001
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2768D · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.3750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 2.7170 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.3750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
OVERALL WIDTH0.7813 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.7170 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STANDOUT WIDTH0.1563 INCHES NOMINAL IN
CUP WIDTH0.6250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
1400-1588Interchangeable
interchangeable cross-reference
interchangeable
225727Interchangeable
interchangeable cross-reference
interchangeable
A1403Interchangeable
interchangeable cross-reference
interchangeable
T-105Interchangeable
interchangeable cross-reference
interchangeable
1340Interchangeable
interchangeable cross-reference
interchangeable
MS15444-85Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2768D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2768D?
2768D is a BEARING,ROLLER,TAPERED.
What parts can replace 2768D?
There are 25 known substitutes for 2768D: 1400-1588, 225727, A1403 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2768D?
2768D is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6001. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2768D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026