PartsTable
Technical Data Sheet
Download PDF

275-95 — SOLENOID,ELECTRICAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

275-95: SOLENOID,ELECTRICAL.

The SOLENOID,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, current_rating: 65.0 AMPERES NOMINAL, peripheral_diameter: 0.265 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN, center_hole_diameter: 0.155 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN, cross-sectional_height: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, end_item_identification: NSN 2320-01-452-5579, TRUCK TRACTOR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-122-3242, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
275-95
NSN: 5330-01-122-3242
NIINs: 011223242, 011380166, 015090746
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
current_rating65.0 AMPERES NOMINAL
peripheral_diameter0.265 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
center_hole_diameter0.155 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
cross-sectional_height0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
end_item_identificationNSN 2320-01-452-5579, TRUCK TRACTOR
voltage_rating_in_volts24.0 DC NOMINAL
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-122-3242
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 275-95 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
PERIPHERAL DIAMETER: 0.265 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.155 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
PERIPHERAL DIAMETER0.265 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.155 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
MS27595Reference document
Same NSN cross-reference
Reference document — Identification reference
MS27595-007Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S30989-007Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 275-95?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 275-95?
275-95 is a SOLENOID,ELECTRICAL.
What parts can replace 275-95?
There are 3 known substitutes for 275-95: MS27595, MS27595-007, S30989-007. Substitute compatibility should be verified for your specific system.
What is the NSN for 275-95?
275-95 is cataloged in the U.S. Government catalog under NSN 5330-01-122-3242. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 275-95

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.