PartsTable
Technical Data Sheet
Download PDF

274338 PC1 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

274338 PC1: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 6.6919 INCHES MINIMUM AND 6.6929 INCHES MAXIMUM IN, contact_angle: 37.0 DEGREES NOMINAL, overall_width: 2.0422 INCHES MINIMUM AND 2.0472 INCHES MAXIMUM IN, alignment_type: RIGID. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-319-2481, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
274338 PC1
NSN: 3110-01-319-2481
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter6.6919 INCHES MINIMUM AND 6.6929 INCHES MAXIMUM IN
contact_angle37.0 DEGREES NOMINAL
overall_width2.0422 INCHES MINIMUM AND 2.0472 INCHES MAXIMUM IN
alignment_typeRIGID
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter12.2031 INCHES MINIMUM AND 12.2047 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-01-319-2481
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 274338 PC1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 12.2031 INCHES MINIMUM AND 12.2047 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 37.0 DEGREES NOMINAL
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH2.0422 INCHES MINIMUM AND 2.0472 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER12.2031 INCHES MINIMUM AND 12.2047 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
CONTACT ANGLE37.0 DEGREES NOMINAL
LOAD DIRECTIONANGULAR
ALIGNMENT TYPERIGID
BORE DIAMETER6.6919 INCHES MINIMUM AND 6.6929 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
7234Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C-40428 N-228Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 274338 PC1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 274338 PC1?
274338 PC1 is a BEARING,BALL,ANNULAR.
What parts can replace 274338 PC1?
There are 2 known substitutes for 274338 PC1: 7234, C-40428 N-228. Substitute compatibility should be verified for your specific system.
What is the NSN for 274338 PC1?
274338 PC1 is cataloged in the U.S. Government catalog under NSN 3110-01-319-2481. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 274338 PC1