PartsTable
Technical Data Sheet
Download PDF

274222PC2 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

274222PC2: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include diameter: 0.5150 INCHES MINIMUM AND 0.5154 INCHES MAXIMUM IN, material: COPPER ALLOY OVERALL, chamfer_length: 0.062 INCHES NOMINAL IN, pin_chamfer_angle: 15.0 DEGREES NOMINAL, under_head_length: 0.625 INCHES NOMINAL IN, material_document_and_classification: QQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-916-2932, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
274222PC2
NSN: 5315-00-916-2932
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
diameter0.5150 INCHES MINIMUM AND 0.5154 INCHES MAXIMUM IN
materialCOPPER ALLOY OVERALL
chamfer_length0.062 INCHES NOMINAL IN
pin_chamfer_angle15.0 DEGREES NOMINAL
under_head_length0.625 INCHES NOMINAL IN
material_document_and_classificationQQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-916-2932
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 274222PC2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.062 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 0.625 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.5150 INCHES MINIMUM AND 0.5154 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.062 INCHES NOMINAL IN
UNDER HEAD LENGTH0.625 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.5150 INCHES MINIMUM AND 0.5154 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 274222PC2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 274222PC2?
274222PC2 is a PIN,STRAIGHT,HEADED.
What is the NSN for 274222PC2?
274222PC2 is cataloged in the U.S. Government catalog under NSN 5315-00-916-2932. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 274222PC2