PartsTable
Technical Data Sheet
Download PDF

27307 — SWITCH,CODE INDICATING WHEEL

✓ Government record, cited
InLine · NUT WASHER
PRODUCT OVERVIEW

27307: SWITCH,CODE INDICATING WHEEL.

This SATA 6Gb/s SATA cable meets the latest standards and features and with transfer rates up to 6 Gbps twice as fast data transfer rate than SATA 3 Gb/s. It is used for internal SATA connection of various devices, such as Hard drives or flash memory to the controller. Moreover, the SATA 6 Gb / s interface, backward compatible to older versions.

This part is cataloged in the U.S. Government catalog under NSN 5310-00-213-0379, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
27307
NSN: 5310-00-213-0379
NIINs: 002130379, 002669475
FSC: 5310 — Nuts and Washers
CAGE: 71871 — ALFA LAVAL INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCAP
nut_height0.562 INCHES NOMINAL IN
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length6.125 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
flute_quantity2
overall_length10.000 INCHES NOMINAL IN
shank_diameter0.890 INCHES NOMINAL IN
NSN5310-00-213-0379
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 27307 · InLine ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.937 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NUT HEIGHT: 0.562 INCHES NOMINAL IN
•
NUT STYLE: CAP
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 16
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.937 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NUT HEIGHT0.562 INCHES NOMINAL IN
NUT STYLECAP
THREAD CLASS2B
THREAD QUANTITY PER INCH16
MATERIALSTEEL CORROSION RESISTING OVERALL
BEARING SURFACE TYPEFLAT
SUBSTITUTES & CROSS-REFERENCES 4
A-1208PIECE96Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
APS-19099Reference document
Same NSN cross-reference
Reference document — Secondary reference
A1911PC96Reference document
Same NSN cross-reference
Reference document — Secondary reference
19099Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 27307?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 27307?
27307 is a SWITCH,CODE INDICATING WHEEL manufactured by InLine.
What parts can replace 27307?
There are 4 known substitutes for 27307: A-1208PIECE96, APS-19099, A1911PC96 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 27307?
27307 is cataloged in the U.S. Government catalog under NSN 5310-00-213-0379. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 27307