PartsTable
Technical Data Sheet
Download PDF

273014 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

273014: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.469 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 1.500 INCHES MINIMUM IN, fastener_length: 5.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-550-4399, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
273014
NSN: 5305-00-550-4399
FSC: 5305 — Screws
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.469 INCHES NOMINAL IN
thread_class3A A
thread_length1.500 INCHES MINIMUM IN
fastener_length5.250 INCHES NOMINAL IN
special_featuresFURNISHED W/1 HEX NUT AND LOCKWASHER
thread_directionRIGHT-HAND
width_between_flats0.875 INCHES NOMINAL IN
nominal_thread_diameter0.625 INCHES IN
thread_quantity_per_inch18
thread_series_designatorUNF
NSN5305-00-550-4399
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 273014 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.469 INCHES NOMINAL IN
•
FASTENER LENGTH: 5.250 INCHES NOMINAL IN
•
THREAD LENGTH: 1.500 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.469 INCHES NOMINAL IN
FASTENER LENGTH5.250 INCHES NOMINAL IN
THREAD LENGTH1.500 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.875 INCHES NOMINAL IN
SPECIAL FEATURESFURNISHED W/1 HEX NUT AND LOCKWASHER
THREAD CLASS3A A
THREAD QUANTITY PER INCH18
SUBSTITUTES & CROSS-REFERENCES 2
A1021Reference document
Same NSN cross-reference
Reference document — Secondary reference
0273014AND9156257AND0456260Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 273014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 273014?
273014 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 273014?
There are 2 known substitutes for 273014: A1021, 0273014AND9156257AND0456260. Substitute compatibility should be verified for your specific system.
What is the NSN for 273014?
273014 is cataloged in the U.S. Government catalog under NSN 5305-00-550-4399. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 273014