PartsTable
Technical Data Sheet
272920 ✓ Verified by PartsTable
· NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SAW,BAND,ELECTRIC,PORTABLE is a the manufacturer industrial component. Key specifications include blade_length: 44.875 INCHES NOMINAL IN, overall_length: 21.0 INCHES NOMINAL IN, voltage_rating: 18.0 VOLTS NOMINAL, blade_thickness: 0.50 INCHES NOMINAL IN, special_features: LITHIUM ION BATTERY, M18 AND M12 MULTI VOLT CHARGER, 15 LBS, 5X5 CAPACITY, SFPM 380.0 LBS, features_provided: HANG-UP HOOK. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-515-8890, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
272920
NSN: 5310-00-515-8890
FSC: 5310
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
blade_length44.875 INCHES NOMINAL IN
overall_length21.0 INCHES NOMINAL IN
voltage_rating18.0 VOLTS NOMINAL
blade_thickness0.50 INCHES NOMINAL IN
special_featuresLITHIUM ION BATTERY, M18 AND M12 MULTI VOLT CHARGER, 15 LBS, 5X5 CAPACITY, SFPM 380.0 LBS
features_providedHANG-UP HOOK
part_name_assigned_by_controlling_agencySAW, BAND, ELECTRIC, PORTABLE
NSN5310-00-515-8890
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 272920 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
THREAD DIRECTION: RIGHT-HAND
NOMINAL THREAD SIZE: 0.750 INCHES IN
BEARING SURFACE TYPE: CHAMFERED
THREAD QUANTITY PER INCH: 16
THREAD SERIES: UNF
MATERIAL: STEEL OVERALL
THREAD CLASS: 2B
WIDTH ACROSS FLATS: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
BEARING SURFACE TYPECHAMFERED
THREAD QUANTITY PER INCH16
THREAD SERIESUNF
MATERIALSTEEL OVERALL
THREAD CLASS2B
WIDTH ACROSS FLATS1.125 INCHES NOMINAL IN
NUT HEIGHT0.438 INCHES NOMINAL IN
NUT STYLEHEXAGON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
100557Interchangeable
interchangeable cross-reference
interchangeable
13827Interchangeable
interchangeable cross-reference
interchangeable
70251Interchangeable
interchangeable cross-reference
interchangeable
115508Interchangeable
interchangeable cross-reference
interchangeable
8148650Interchangeable
interchangeable cross-reference
interchangeable
82-61114Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 272920?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 272920?
272920 is a SAW,BAND,ELECTRIC,PORTABLE.
What parts can replace 272920?
There are 8 known substitutes for 272920: 100557, 13827, 70251 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 272920?
272920 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-515-8890. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 272920