PartsTable
Technical Data Sheet
Download PDF

27235 — BEARING,PLAIN,SELF-ALIGNING

✓ Government record, cited
Freecom · BALL BEARING
PRODUCT OVERVIEW

27235: BEARING,PLAIN,SELF-ALIGNING.

- Based on HP´s leading technology. - Saves up to 800 GB of data on a single data cartridge in less than 2 hours (LTO960). - Up to 160 MB/s data transfer rate (LTO960).

- Lowest price per GB in comparisson to other tape technologies. - Internal 5,25”-Solution (half and full height). - One Button Disaster Recovery.

- Tape AlertTM monitors device and media, and warns before errors occur - MTBF at 250,000 hours at permanent use (100% duty cycle). - Supports WORM functionality (Write Once Read Multiple) with LTO3 WORM media (only with LTO960). - Automatically cleaning of the recording head (does not eliminates the using of a cleaning cartridge).

- Reads the data while writing: the written data gets checked and automatically overwritten in case of bad media section. - Even in the case of 12.5 % recorded data loss (one complete track) on the tape, the data can be restored. - Supports most of the operating systems and plattform e.

g. Windows (NT, 2000 This part is cataloged in the U.S. Government catalog under NSN 3120-00-554-4852, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
27235
NSN: 3120-00-554-4852
NIINs: 005544852, 011896757
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 11599 — TRIUMPH ENGINE CONTROL SYSTEMS LLC (USA)
SPECIFICATIONS
bore_diameter0.1645 INCHES MINIMUM AND 0.1650 INCHES MAXIMUM IN
special_featuresSNUG FIT BRG
style_designatorWITH INSERT AND/OR LINER
surface_treatmentCHROMIUM INNER MEMBER
inner_member_width0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
outer_member_width0.1845 INCHES NOMINAL IN
outer_member_outside_diameter0.4682 INCHES MINIMUM AND 0.4687 INCHES MAXIMUM IN
NSN3120-00-554-4852
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 27235 · Freecom ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER MEMBER WIDTH: 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.1845 INCHES NOMINAL IN
•
STYLE DESIGNATOR: WITH INSERT AND/OR LINER
•
SURFACE TREATMENT: CHROMIUM INNER MEMBER
•
BORE DIAMETER: 0.1645 INCHES MINIMUM AND 0.1650 INCHES MAXIMUM IN
•
OUTER MEMBER OUTSIDE DIAMETER: 0.4682 INCHES MINIMUM AND 0.4687 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
INNER MEMBER WIDTH0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.1845 INCHES NOMINAL IN
STYLE DESIGNATORWITH INSERT AND/OR LINER
SPECIAL FEATURESSNUG FIT BRG
SURFACE TREATMENTCHROMIUM INNER MEMBER
BORE DIAMETER0.1645 INCHES MINIMUM AND 0.1650 INCHES MAXIMUM IN
OUTER MEMBER OUTSIDE DIAMETER0.4682 INCHES MINIMUM AND 0.4687 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
9986924Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LSS2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 27235?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 27235?
27235 is a BEARING,PLAIN,SELF-ALIGNING manufactured by Freecom.
What parts can replace 27235?
There are 2 known substitutes for 27235: 9986924, LSS2. Substitute compatibility should be verified for your specific system.
What is the NSN for 27235?
27235 is cataloged in the U.S. Government catalog under NSN 3120-00-554-4852. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 27235