PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 272202PC9
272202PC9 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OVERALL, hardness_rating: 68.0 SHORE DUROMETER A NOMINAL OVERALL, rim_surface_width: 0.187 INCHES NOMINAL IN, inner_groove_width: 0.188 INCHES NOMINAL IN, peripheral_diameter: 2.000 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN, center_hole_diameter: 1.625 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-024-9499, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
272202PC9
NSN: 5330-00-024-9499
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OVERALL
hardness_rating68.0 SHORE DUROMETER A NOMINAL OVERALL
rim_surface_width0.187 INCHES NOMINAL IN
inner_groove_width0.188 INCHES NOMINAL IN
peripheral_diameter2.000 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
center_hole_diameter1.625 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
cross-sectional_height0.250 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
material_document_and_classificationMIL-R-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-024-9499
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 272202PC9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER GROOVE WIDTH: 0.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 2.000 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.625 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
HARDNESS RATING: 68.0 SHORE DUROMETER A NOMINAL OVERALL
•
MATERIAL: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
INNER GROOVE WIDTH0.188 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
PERIPHERAL DIAMETER2.000 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.625 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
HARDNESS RATING68.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIALRUBBER ISOBUTYLENE-ISOPRENE CLASS IIR OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
RIM SURFACE WIDTH0.187 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
J512Interchangeable
interchangeable cross-reference
interchangeable
SAE-J512Interchangeable
interchangeable cross-reference
interchangeable
SAE J512 5 010111BInterchangeable
interchangeable cross-reference
interchangeable
12Z62PC9Interchangeable
interchangeable cross-reference
interchangeable
8Z6578-9Interchangeable
interchangeable cross-reference
interchangeable
146398PC24Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 272202PC9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 272202PC9?
272202PC9 is a PACKING,PREFORMED.
What parts can replace 272202PC9?
There are 21 known substitutes for 272202PC9: J512, SAE-J512, SAE J512 5 010111B and 18 more. Substitute compatibility should be verified for your specific system.
Is 272202PC9 still available?
272202PC9 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 272202PC9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026