PartsTable
Technical Data Sheet
Download PDF

2722-1-02 — HANDLE,BAIL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2722-1-02: HANDLE,BAIL.

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include thread_class: 2A A, inside_length: 3.699 INCHES MINIMUM AND 3.738 INCHES MAXIMUM IN, stock_diameter: 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN, mounting_method: THREADED STUD(S), style_designator: EYE HOOK, surface_treatment: NICKEL OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-762-5839, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2722-1-02
NSN: 5340-00-762-5839
FSC: 5340 — Hardware, Commercial
CAGE: 71279 — INTERCONNECTION PRODUCTS INC (USA)
SPECIFICATIONS
thread_class2A A
inside_length3.699 INCHES MINIMUM AND 3.738 INCHES MAXIMUM IN
stock_diameter0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
mounting_methodTHREADED STUD(S)
style_designatorEYE HOOK
surface_treatmentNICKEL OVERALL
nominal_thread_size0.375 INCHES IN
end_item_identificationAIRCRAFT, HAWKEYE E-2C; FMS-AIRCRAFT, ORION P-3; MISSILE, LANCE; HELICOPTER, UTILITY/SEARCH AND RECOVERY UH-1N; AIRCRAFT, ORION P-3; HELICOPTER, SEASPRITE H-2
mounting_facility_length1.343 INCHES MINIMUM AND 1.407 INCHES MAXIMUM IN
thread_series_designatorUNF
mounting_facility_quantity2
center_to_center_distance_between_mounting_facilities_parallel_to_length3.980 INCHES MINIMUM AND 4.020 INCHES MAXIMUM IN
NSN5340-00-762-5839
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2722-1-02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
INSIDE LENGTH: 3.699 INCHES MINIMUM AND 3.738 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 3.980 INCHES MINIMUM AND 4.020 INCHES MAXIMUM IN
•
MOUNTING FACILITY LENGTH: 1.343 INCHES MINIMUM AND 1.407 INCHES MAXIMUM IN
•
MOUNTING METHOD: THREADED STUD(S)
•
STYLE DESIGNATOR: EYE HOOK
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
STOCK DIAMETER: 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
INSIDE LENGTH3.699 INCHES MINIMUM AND 3.738 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH3.980 INCHES MINIMUM AND 4.020 INCHES MAXIMUM IN
MOUNTING FACILITY LENGTH1.343 INCHES MINIMUM AND 1.407 INCHES MAXIMUM IN
MOUNTING METHODTHREADED STUD(S)
STYLE DESIGNATOREYE HOOK
NOMINAL THREAD SIZE0.375 INCHES IN
STOCK DIAMETER0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
SURFACE TREATMENTNICKEL OVERALL
THREAD CLASS2A A
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 5
7571869P0003Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
7571869P3Reference document
Same NSN cross-reference
Reference document — Secondary reference
94-415-1036-02-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
94-415-1036-02-Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
127987-202Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2722-1-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2722-1-02?
2722-1-02 is a HANDLE,BAIL.
What parts can replace 2722-1-02?
There are 5 known substitutes for 2722-1-02: 7571869P0003, 7571869P3, 94-415-1036-02-00 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2722-1-02?
2722-1-02 is cataloged in the U.S. Government catalog under NSN 5340-00-762-5839. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2722-1-02

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.