PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 271747PC2
271747PC2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.500 INCHES NOMINAL IN, overall_length: 3.500 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 2.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-252-3612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
271747PC2
NSN: 5330-00-252-3612
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.500 INCHES NOMINAL IN
overall_length3.500 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter2.312 INCHES NOMINAL IN
bolt_hole_quantity4
outside_corner_radius0.500 INCHES NOMINAL IN
cross-sectional_thickness0.010 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.500 INCHES NOMINAL IN
NSN5330-00-252-3612
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 271747PC2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE DIAMETER: 2.312 INCHES NOMINAL IN
•
MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.500 INCHES NOMINAL IN
HOLE DIAMETER0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE DIAMETER2.312 INCHES NOMINAL IN
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT HOLE QUANTITY4
OVERALL LENGTH3.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
44297Interchangeable
interchangeable cross-reference
interchangeable
S12T93Interchangeable
interchangeable cross-reference
interchangeable
599-578-9999Interchangeable
interchangeable cross-reference
interchangeable
E30230Interchangeable
interchangeable cross-reference
interchangeable
7402076Interchangeable
interchangeable cross-reference
interchangeable
QPL11276Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 271747PC2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 271747PC2?
271747PC2 is a GASKET.
What parts can replace 271747PC2?
There are 10 known substitutes for 271747PC2: 44297, S12T93, 599-578-9999 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 271747PC2?
271747PC2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-252-3612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 271747PC2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026