PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 271744PC4
271744PC4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.500 INCHES NOMINAL IN, overall_length: 2.000 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 0.656 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-3849, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
271744PC4
NSN: 5330-00-599-3849
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.500 INCHES NOMINAL IN
overall_length2.000 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter0.656 INCHES NOMINAL IN
bolt_hole_quantity4
outside_corner_radius0.312 INCHES NOMINAL IN
cross-sectional_thickness0.010 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.312 INCHES NOMINAL IN
NSN5330-00-599-3849
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 271744PC4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.312 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
APERTURE DIAMETER: 0.656 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.010 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.312 INCHES NOMINAL IN
OVERALL WIDTH1.500 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
APERTURE DIAMETER0.656 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.010 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATORNON-CIRCULAR
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
200462Interchangeable
interchangeable cross-reference
interchangeable
6154533Interchangeable
interchangeable cross-reference
interchangeable
44377Interchangeable
interchangeable cross-reference
interchangeable
FS-200M-SBInterchangeable
interchangeable cross-reference
interchangeable
277 ITEM 2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 271744PC4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 271744PC4?
271744PC4 is a GASKET.
What parts can replace 271744PC4?
There are 5 known substitutes for 271744PC4: 200462, 6154533, 44377 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 271744PC4?
271744PC4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-599-3849. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 271744PC4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026