PartsTable
Technical Data Sheet
Download PDF

2715J — FELT,MECHANICAL,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2715J: FELT,MECHANICAL,PREFORMED.

The FELT,MECHANICAL,PREFORMED is a the manufacturer industrial component. Key specifications include material: WOOL OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, outside_diameter: 2.875 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 1.390 INCHES MINIMUM AND 1.422 INCHES MAXIMUM IN, cross-sectional_width: 0.7345 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-355-2099, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2715J
NSN: 5330-00-355-2099
FSC: 5330 — Packing and Gasket Materials
CAGE: 77873 — ROCKFORD POWERTRAIN INC DIV POWERTRAIN ROCKFORD, INC. (USA)
SPECIFICATIONS
materialWOOL OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
outside_diameter2.875 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter1.390 INCHES MINIMUM AND 1.422 INCHES MAXIMUM IN
cross-sectional_width0.7345 INCHES NOMINAL IN
cross-sectional_height0.625 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR
NSN5330-00-355-2099
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2715J MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.7345 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OUTSIDE DIAMETER: 2.875 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.390 INCHES MINIMUM AND 1.422 INCHES MAXIMUM IN
•
MATERIAL: WOOL OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.625 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.7345 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OUTSIDE DIAMETER2.875 INCHES NOMINAL IN
APERTURE DIAMETER1.390 INCHES MINIMUM AND 1.422 INCHES MAXIMUM IN
MATERIALWOOL OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
9040985Reference document
Same NSN cross-reference
Reference document — Secondary reference
940259Reference document
Same NSN cross-reference
Reference document — Secondary reference
40985Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2715J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2715J?
2715J is a FELT,MECHANICAL,PREFORMED.
What parts can replace 2715J?
There are 3 known substitutes for 2715J: 9040985, 940259, 40985. Substitute compatibility should be verified for your specific system.
What is the NSN for 2715J?
2715J is cataloged in the U.S. Government catalog under NSN 5330-00-355-2099. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2715J

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.