PartsTable
Technical Data Sheet
2715-2 ✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RELAY,ELECTROMAGNETIC is a Clementoni industrial component. Key specifications include phase: THREE, length: 380.0 MILLIMETERS NOMINAL MM, diameter: 15.0 MILLIMETERS MM, material: STEEL, duty_cycle: CONTINUOUS, insert_size: 0.125 TO 0.625 IN. DIA,NO 1/4 IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-910-6735, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2715-2
NSN: 5340-00-910-6735
FSC: 5340
CAGE: 78206 — STAR EXPANSION CO (USA)
SPECIFICATIONS
phaseTHREE
length380.0 MILLIMETERS NOMINAL MM
diameter15.0 MILLIMETERS MM
materialSTEEL
duty_cycleCONTINUOUS
insert_size0.125 TO 0.625 IN. DIA,NO 1/4 IN
ambient_temp50.0 CELSIUS DEGC
control_typeREMOTE
fastener_typeSCREW
unit_quantity1
overall_height28.000 INCHES NOMINAL IN
overall_length8.880 INCHES NOMINAL IN
NSN5340-00-910-6735
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2715-2 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SURFACE TREATMENT: ZINC
UNIT QUANTITY: 1
INSERT TYPE FOR WHICH DESIGNED: SCREW
MATERIAL: STEEL
HOLE ACCOMMODATION DIAMETER: 0.438 INCHES NOMINAL IN
THREAD PROVISION: THREADED
INSERT SIZE: 0.125 TO 0.625 IN. DIA,NO 1/4 IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTZINC
UNIT QUANTITY1
INSERT TYPE FOR WHICH DESIGNEDSCREW
MATERIALSTEEL
HOLE ACCOMMODATION DIAMETER0.438 INCHES NOMINAL IN
THREAD PROVISIONTHREADED
INSERT SIZE0.125 TO 0.625 IN. DIA,NO 1/4 IN
OVERALL LENGTH2.000 INCHES NOMINAL IN
FASTENER TYPESCREW
STYLE DESIGNATORSCREW ANCHOR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
FFB588Upgraded Successor
successor cross-reference
successor
FF-S-92Upgraded Successor
successor cross-reference
successor
2121 1/4 SHORTInterchangeable
Same NIIN cross-reference
interchangeable
00053841111060Interchangeable
Same NIIN cross-reference
interchangeable
11-106Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2715-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2715-2?
2715-2 is a RELAY,ELECTROMAGNETIC manufactured by Clementoni.
What parts can replace 2715-2?
There are 5 known substitutes for 2715-2: FFB588, FF-S-92, 2121 1/4 SHORT and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2715-2?
2715-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-910-6735. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2715-2