PartsTable
Technical Data Sheet
Download PDF

2710-250M — FERRULE,GROOVED CLAMP COUPLING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2710-250M: FERRULE,GROOVED CLAMP COUPLING.

The FERRULE,GROOVED CLAMP COUPLING is a the manufacturer industrial component. Key specifications include material: NICKEL OVERALL, flange_length: 0.133 INCHES NOMINAL IN, overall_length: 0.871 INCHES NOMINAL IN, wall_thickness: 0.064 INCHES NOMINAL IN, special_features: MALE FERRULE; MATERIAL AND LOCATION = NICKEL ALLOY,AMS 5666,ALLOY 625, OVERALL, ferrule_inside_diameter: 2.505 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-308-4303, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2710-250M
NSN: 5340-01-308-4303
FSC: 5340 — Hardware, Commercial
CAGE: 15284 — EATON CORPORATION DIV FED (USA)
SPECIFICATIONS
materialNICKEL OVERALL
flange_length0.133 INCHES NOMINAL IN
overall_length0.871 INCHES NOMINAL IN
wall_thickness0.064 INCHES NOMINAL IN
special_featuresMALE FERRULE; MATERIAL AND LOCATION = NICKEL ALLOY,AMS 5666,ALLOY 625, OVERALL
ferrule_inside_diameter2.505 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
flange_outside_diameter3.005 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN
cross-sectional_shape_styleFLANGED
material_document_and_classificationAMS 5596 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-308-4303
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2710-250M MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5596 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: FLANGED
•
WALL THICKNESS: 0.064 INCHES NOMINAL IN
•
FLANGE LENGTH: 0.133 INCHES NOMINAL IN
•
FERRULE INSIDE DIAMETER: 2.505 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
•
MATERIAL: NICKEL OVERALL
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5596 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.871 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLANGED
WALL THICKNESS0.064 INCHES NOMINAL IN
FLANGE LENGTH0.133 INCHES NOMINAL IN
FERRULE INSIDE DIAMETER2.505 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
SPECIAL FEATURESMALE FERRULE; MATERIAL AND LOCATION = NICKEL ALLOY,AMS 5666,ALLOY 625, OVERALL
MATERIALNICKEL OVERALL
FLANGE OUTSIDE DIAMETER3.005 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 7
D35419L250MReference document
Same NSN cross-reference
Reference document — Secondary reference
2919AA250Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
9849-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NK102346-0250Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ST7M277L250MReference document
Same NSN cross-reference
Reference document — Secondary reference
10113130Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2710-250M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2710-250M?
2710-250M is a FERRULE,GROOVED CLAMP COUPLING.
What parts can replace 2710-250M?
There are 7 known substitutes for 2710-250M: D35419L250M, 2919AA250, 9849-7 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2710-250M?
2710-250M is cataloged in the U.S. Government catalog under NSN 5340-01-308-4303. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2710-250M

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.