PartsTable
Technical Data Sheet
PartsTable / MRO / 27091
27091 ✓ Verified by PartsTable
Clementoni · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Disney Princess - 104 pcs - Supercolor Puzzle. Key specifications include material: PLASTIC OVERALL, case_style: SQUARE, seal_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, overall_width: 2.500 INCHES NOMINAL IN, terminal_type: WIRE LEAD, overall_length: 4.438 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-9140, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 27091
NSN: 5330-00-291-9140
FSC: 5330
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
case_styleSQUARE
seal_width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
overall_width2.500 INCHES NOMINAL IN
terminal_typeWIRE LEAD
overall_length4.438 INCHES NOMINAL IN
mounting_methodINLET CONNECTION AND OUTLET CONNECTION
overall_diameter11.0 MILLIMETERS NOMINAL MM
special_featuresWITH CENTERGUIDE, PREDRILLED
feather_edge_angle30.0 DEGREES NOMINAL
frequency_in_hertz60.0 SECOND VOLTAGE
center_hole_diameter0.750 INCHES NOMINAL IN
NSN5330-00-291-9140
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 27091 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 3.500 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 2.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
HOUSING BORE DIAMETER3.500 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER2.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
ES0682655Interchangeable
interchangeable cross-reference
interchangeable
678078-2Interchangeable
interchangeable cross-reference
interchangeable
D15-551-0PC401Interchangeable
interchangeable cross-reference
interchangeable
D15-430LPC412Interchangeable
interchangeable cross-reference
interchangeable
D15-640APC411Interchangeable
interchangeable cross-reference
interchangeable
ES677316Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 27091?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 27091?
27091 is a SWITCH,FLOW manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 27091?
There are 24 known substitutes for 27091: ES0682655, 678078-2, D15-551-0PC401 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 27091?
27091 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-9140. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 27091

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026