PartsTable
Technical Data Sheet
Download PDF

2708-1A — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2708-1A: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.375 INCHES NOMINAL IN, fork_depth: 1.000 INCHES NOMINAL IN, thread_class: 2B ROD CONNECTION, hole_diameter: 0.186 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN, overall_width: 0.436 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-969-6407, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2708-1A
NSN: 5340-00-969-6407
FSC: 5340 — Hardware, Commercial
CAGE: 41625 — INCOM INTL INC MORSE CONTROLS DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.375 INCHES NOMINAL IN
fork_depth1.000 INCHES NOMINAL IN
thread_class2B ROD CONNECTION
hole_diameter0.186 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
overall_width0.436 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
thread_length0.750 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
fork_span_width0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
surface_treatmentZINC OVERALL
NSN5340-00-969-6407
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2708-1A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.141 INCHES NOMINAL IN
•
END RADIUS: 0.375 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES NOMINAL ROD CONNECTION IN
•
STYLE DESIGNATOR: CLEVIS
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
FORK SPAN WIDTH0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
FORK ARM THICKNESS0.141 INCHES NOMINAL IN
END RADIUS0.375 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES NOMINAL ROD CONNECTION IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.436 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.190 INCHES ROD CONNECTION IN
SURFACE TREATMENTZINC OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
031-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
611982Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340009696407Reference document
Same NSN cross-reference
Reference document — Secondary reference
100912Reference document
Same NSN cross-reference
Reference document — Secondary reference
60S2Reference document
Same NSN cross-reference
Reference document — Secondary reference
T14728Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2708-1A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2708-1A?
2708-1A is a CLEVIS,ROD END.
What parts can replace 2708-1A?
There are 8 known substitutes for 2708-1A: 031-1, 611982, 5340009696407 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2708-1A?
2708-1A is cataloged in the U.S. Government catalog under NSN 5340-00-969-6407. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2708-1A