PartsTable
Technical Data Sheet
Download PDF

2700-7S — STUD ASSEMBLY,TURNLOCK FASTENER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

2700-7S: STUD ASSEMBLY,TURNLOCK FASTENER.

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include diameter: 0.251 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN, material: STEEL COMP 302 STUD, drive_type: SLOTTED, eyelet_length: 0.328 INCHES NOMINAL IN, stud_head_height: 0.069 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-787-8677, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2700-7S
NSN: 5325-00-787-8677
NIINs: 007878677, 011320835
FSC: 5325 — Fastening Devices
CAGE: 71286 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV CAMLOC PRODUCTS (USA)
SPECIFICATIONS
diameter0.251 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
materialSTEEL COMP 302 STUD
drive_typeSLOTTED
eyelet_length0.328 INCHES NOMINAL IN
stud_head_height0.069 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
stud_assembly_styleSTUD ASSEMBLY
eyelet_outside_diameter0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
turnlock_stud_head_styleSTUD HEAD
material_accommodated_thickness0.180 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
distance_from_engaging_member_to_largest_bearing_surface_of_head0.641 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN
NSN5325-00-787-8677
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 2700-7S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EYELET OUTSIDE DIAMETER: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
DRIVE TYPE: SLOTTED
•
MATERIAL ACCOMMODATED THICKNESS: 0.180 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
•
DIAMETER: 0.251 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
•
STUD HEAD HEIGHT: 0.069 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN
•
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD: 0.641 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN
•
TURNLOCK STUD HEAD STYLE: STUD HEAD
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
EYELET OUTSIDE DIAMETER0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
DRIVE TYPESLOTTED
MATERIAL ACCOMMODATED THICKNESS0.180 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
DIAMETER0.251 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
STUD HEAD HEIGHT0.069 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD0.641 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN
TURNLOCK STUD HEAD STYLESTUD HEAD
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 305 EYELET
SUBSTITUTES & CROSS-REFERENCES 4
580R953H07Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
9192517Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
43995922-001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
401823-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2700-7S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2700-7S?
2700-7S is a STUD ASSEMBLY,TURNLOCK FASTENER.
What parts can replace 2700-7S?
There are 4 known substitutes for 2700-7S: 580R953H07, 9192517, 43995922-001 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2700-7S?
2700-7S is cataloged in the U.S. Government catalog under NSN 5325-00-787-8677. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2700-7S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.