PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 26M68-305-32
26M68-305-32 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PAPER,GASKET is a the manufacturer industrial component. Key specifications include width: 36.000 INCHES NOMINAL IN, material: PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED, thickness: 0.016 INCHES NOMINAL IN, fiber_type: ANIMAL OR PLANT, environmental_protection: GASOLINE AND OIL RESISTANT AND WATER RESISTANT AND AIR AND GASES, material_document_and_classification: HH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-585-1091, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
26M68-305-32
NSN: 5330-00-585-1091
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width36.000 INCHES NOMINAL IN
materialPAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
thickness0.016 INCHES NOMINAL IN
fiber_typeANIMAL OR PLANT
environmental_protectionGASOLINE AND OIL RESISTANT AND WATER RESISTANT AND AIR AND GASES
material_document_and_classificationHH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NSN5330-00-585-1091
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 26M68-305-32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 36.000 INCHES NOMINAL IN
•
THICKNESS: 0.016 INCHES NOMINAL IN
•
FIBER TYPE: ANIMAL OR PLANT
•
ENVIRONMENTAL PROTECTION: GASOLINE AND OIL RESISTANT AND WATER RESISTANT AND AIR AND GASES
•
MATERIAL: PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH36.000 INCHES NOMINAL IN
THICKNESS0.016 INCHES NOMINAL IN
FIBER TYPEANIMAL OR PLANT
ENVIRONMENTAL PROTECTIONGASOLINE AND OIL RESISTANT AND WATER RESISTANT AND AIR AND GASES
MATERIALPAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
F215000M1RWInterchangeable
interchangeable cross-reference
interchangeable
ASTMF104-03Interchangeable
interchangeable cross-reference
interchangeable
1713094Interchangeable
interchangeable cross-reference
interchangeable
MIL-G-12803 F21000M2RInterchangeable
interchangeable cross-reference
interchangeable
2208-W-413Interchangeable
interchangeable cross-reference
interchangeable
56152R2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 26M68-305-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 26M68-305-32?
26M68-305-32 is a PAPER,GASKET.
What parts can replace 26M68-305-32?
There are 25 known substitutes for 26M68-305-32: F215000M1RW, ASTMF104-03, 1713094 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 26M68-305-32?
26M68-305-32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-585-1091. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 26M68-305-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026