PartsTable
Technical Data Sheet
PartsTable / O-RING / 26KP846
26KP846 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include special_features: 2 5/8 ID X 1/8 SECTION, center_hole_diameter: 2.625 INCHES NOMINAL IN, end_item_identification: 2320-01-543-0651;TRUCK,WRECKER, 22.5 TON, 10X10,LVSR,MODEL NUMBER MKR15, part_name_assigned_by_controlling_agency: O-RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-597-8839, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
26KP846
NSN: 5331-01-597-8839
FSC: 5331 — O-RING
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
special_features2 5/8 ID X 1/8 SECTION
center_hole_diameter2.625 INCHES NOMINAL IN
end_item_identification2320-01-543-0651;TRUCK,WRECKER, 22.5 TON, 10X10,LVSR,MODEL NUMBER MKR15
part_name_assigned_by_controlling_agencyO-RING
NSN5331-01-597-8839
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 26KP846 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 2.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER2.625 INCHES NOMINAL IN
SPECIAL FEATURES2 5/8 ID X 1/8 SECTION
PART NAME ASSIGNED BY CONTROLLING AGENCYO-RING
END ITEM IDENTIFICATION2320-01-543-0651;TRUCK,WRECKER, 22.5 TON, 10X10,LVSR,MODEL NUMBER MKR15
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
126222Interchangeable
interchangeable cross-reference
interchangeable
9672Interchangeable
interchangeable cross-reference
interchangeable
119459R1Interchangeable
interchangeable cross-reference
interchangeable
310-09672-00CInterchangeable
interchangeable cross-reference
interchangeable
06794049127Interchangeable
interchangeable cross-reference
interchangeable
A6794.049.127Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 26KP846?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 26KP846?
26KP846 is a O-RING.
What parts can replace 26KP846?
There are 7 known substitutes for 26KP846: 126222, 9672, 119459R1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 26KP846?
26KP846 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-597-8839. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 26KP846

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026