PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 269HMS130
269HMS130 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 2.686 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.937 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-985-3727, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
269HMS130
NSN: 5330-00-985-3727
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
housing_bore_diameter2.686 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.937 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-985-3727
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 269HMS130 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.686 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.937 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.500 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.686 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.937 INCHES NOMINAL IN
MATERIALSTEEL CASE
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
19241Interchangeable
interchangeable cross-reference
interchangeable
PA11369Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
72609Interchangeable
interchangeable cross-reference
interchangeable
B72609Interchangeable
interchangeable cross-reference
interchangeable
B-32978Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 269HMS130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 269HMS130?
269HMS130 is a SEAL,PLAIN ENCASED.
What parts can replace 269HMS130?
There are 9 known substitutes for 269HMS130: 19241, PA11369, AMS-QQ-A-200/11 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 269HMS130?
269HMS130 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-985-3727. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 269HMS130

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026