PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2692015-1
2692015-1 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 305 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP XM-7 OR STEEL COMP 384 OVERALL, head_style: FLAT CHAMFER, head_height: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, thread_length: 0.283 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-265-6116, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2692015-1
NSN: 5305-01-265-6116
FSC: 5305
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 305 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP XM-7 OR STEEL COMP 384 OVERALL
head_styleFLAT CHAMFER
head_height0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
thread_length0.283 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
fastener_length0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
hardness_rating80.0 ROCKWELL C MINIMUM OVERALL
washer_quantity1
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
NSN5305-01-265-6116
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 2692015-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
WASHER QUANTITY: 1
•
PRIMARY WASHER OUTSIDE DIAMETER: 0.390 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: HEXAGON
•
PRIMARY WASHER MATERIAL THICKNESS: 0.065 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
FASTENER LENGTH0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
WASHER QUANTITY1
PRIMARY WASHER OUTSIDE DIAMETER0.390 INCHES MAXIMUM IN
INTERNAL DRIVE STYLEHEXAGON
PRIMARY WASHER MATERIAL THICKNESS0.065 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 302 OR STEEL COMP 305 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP XM-7 OR STEEL COMP 384 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
934273Interchangeable
interchangeable cross-reference
interchangeable
2-119 V747-75Interchangeable
interchangeable cross-reference
interchangeable
M83248-1-119ESInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2692015-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2692015-1?
2692015-1 is a SCREW,ASSEMBLED WASHER.
What parts can replace 2692015-1?
There are 3 known substitutes for 2692015-1: 934273, 2-119 V747-75, M83248-1-119ES. Substitute compatibility should be verified for your specific system.
What is the NSN for 2692015-1?
2692015-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-265-6116. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2692015-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026