PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 268H130
268H130 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL SPRING, seal_width: 0.500 INCHES NOMINAL IN, construction: SOLID, outside_diameter: 2.690 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.686 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-964-4645, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
268H130
NSN: 5330-00-964-4645
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL SPRING
seal_width0.500 INCHES NOMINAL IN
constructionSOLID
outside_diameter2.690 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.686 INCHES NOMINAL IN
accommodated_shaft_diameter1.937 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-964-4645
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 268H130 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONSTRUCTION: SOLID
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
OUTSIDE DIAMETER: 2.690 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 1.937 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CONSTRUCTIONSOLID
SEAL WIDTH0.500 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
OUTSIDE DIAMETER2.690 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL SPRING
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER1.937 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.686 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
74692Interchangeable
interchangeable cross-reference
interchangeable
MS20822-5-4DInterchangeable
interchangeable cross-reference
interchangeable
SAE AS5195Interchangeable
interchangeable cross-reference
interchangeable
19236Interchangeable
interchangeable cross-reference
interchangeable
7412198Interchangeable
interchangeable cross-reference
interchangeable
76028Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 268H130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 268H130?
268H130 is a SEAL,PLAIN.
What parts can replace 268H130?
There are 9 known substitutes for 268H130: 74692, MS20822-5-4D, SAE AS5195 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 268H130?
268H130 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-964-4645. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 268H130

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026