PartsTable
Technical Data Sheet
Download PDF

26875 — CAPACITOR,FIXED,METALLIZED,PAPER

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

26875: CAPACITOR,FIXED,METALLIZED,PAPER.

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.511 INCHES NOMINAL IN, body_height: 0.276 INCHES NOMINAL IN, body_length: 0.689 INCHES NOMINAL IN, terminal_length: 0.158 INCHES MINIMUM AND 0.236 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-311-2455, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 26875
NSN: 5330-00-311-2455
NIINs: 003112455, 012952223
FSC: 5330 — Packing and Gasket Materials
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.511 INCHES NOMINAL IN
body_height0.276 INCHES NOMINAL IN
body_length0.689 INCHES NOMINAL IN
terminal_length0.158 INCHES MINIMUM AND 0.236 INCHES MAXIMUM IN
special_featuresSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
terminal_diameter0.032 INCHES NOMINAL IN
dielectric_materialPLASTIC POLYCARBONATE
reliability_indicatorNOT ESTABLISHED
supplementary_featuresCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
NSN5330-00-311-2455
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 26875 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUBSTITUTES & CROSS-REFERENCES 3
F600K350Reference document
Same NSN cross-reference
Reference document — Secondary reference
07-851192Reference document
Same NSN cross-reference
Reference document — Secondary reference
851192Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 26875?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 26875?
26875 is a CAPACITOR,FIXED,METALLIZED,PAPER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 26875?
There are 3 known substitutes for 26875: F600K350, 07-851192, 851192. Substitute compatibility should be verified for your specific system.
What is the NSN for 26875?
26875 is cataloged in the U.S. Government catalog under NSN 5330-00-311-2455. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 26875