PartsTable
Technical Data Sheet
Download PDF

268030PC1 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

268030PC1: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.328 INCHES MINIMUM AND 0.358 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 14.735 INCHES MINIMUM AND 14.765 INCHES MAXIMUM IN, aperture_width: 12.735 INCHES MINIMUM AND 12.765 INCHES MAXIMUM IN, overall_length: 15.735 INCHES MINIMUM AND 15.765 INCHES MAXIMUM IN, aperture_length: 13.735 INCHES MINIMUM AND 13.765 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-266-6936, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
268030PC1
NSN: 5330-00-266-6936
FSC: 5330 — Packing and Gasket Materials
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.328 INCHES MINIMUM AND 0.358 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width14.735 INCHES MINIMUM AND 14.765 INCHES MAXIMUM IN
aperture_width12.735 INCHES MINIMUM AND 12.765 INCHES MAXIMUM IN
overall_length15.735 INCHES MINIMUM AND 15.765 INCHES MAXIMUM IN
aperture_length13.735 INCHES MINIMUM AND 13.765 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
bolt_hole_quantity30
cross-sectional_thickness0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NSN5330-00-266-6936
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 268030PC1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 12.735 INCHES MINIMUM AND 12.765 INCHES MAXIMUM IN
•
APERTURE LENGTH: 13.735 INCHES MINIMUM AND 13.765 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH15.735 INCHES MINIMUM AND 15.765 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH14.735 INCHES MINIMUM AND 14.765 INCHES MAXIMUM IN
APERTURE WIDTH12.735 INCHES MINIMUM AND 12.765 INCHES MAXIMUM IN
APERTURE LENGTH13.735 INCHES MINIMUM AND 13.765 INCHES MAXIMUM IN
BOLT HOLE QUANTITY30
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.953 INCHES MINIMUM AND 1.983 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 268030PC1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 268030PC1?
268030PC1 is a GASKET.
What is the NSN for 268030PC1?
268030PC1 is cataloged in the U.S. Government catalog under NSN 5330-00-266-6936. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 268030PC1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.