PartsTable
Technical Data Sheet
Download PDF

268000PC3 — GEAR,SPUR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

268000PC3: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 2315 OVERALL, body_style: PLAIN, SOLID, bore_style: STRAIGHT SPLINE BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 2.6650 INCHES MINIMUM AND 2.6670 INCHES MAXIMUM IN, pressure_angle: 14.5000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-444-4873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
268000PC3
NSN: 3020-00-444-4873
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 2315 OVERALL
body_stylePLAIN, SOLID
bore_styleSTRAIGHT SPLINE BOTH ENDS
tooth_formSTANDARD
pitch_diameter2.6650 INCHES MINIMUM AND 2.6670 INCHES MAXIMUM IN
pressure_angle14.5000 DEGREES
teeth_quantity32
hardness_rating600.0 BRINELL STANDARD NOMINAL OVERALL
spline_quantity6 BOTH ENDS
special_features1ST END CNTRBRD 1.379 IN. DIA AND 0.688 IN. DEEP IN
style_designatorPROTRUDING HUB
end_nominal_length0.125 INCHES FIRST END IN
NSN3020-00-444-4873
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,SPUR TITLE COMPONENT PN 268000PC3 MFR GEAR,SPUR
KEY FEATURES
•
BORE NOMINAL DIAMETER: 1.169 INCHES BOTH ENDS IN
•
TEETH QUANTITY: 32
•
BODY STYLE: PLAIN, SOLID
•
BORE STYLE: STRAIGHT SPLINE BOTH ENDS
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.813 INCHES FIRST END IN
•
FIRST STEP NOMINAL LENGTH: 0.688 INCHES FIRST END IN
•
HARDNESS RATING: 600.0 BRINELL STANDARD NOMINAL OVERALL
•
STYLE DESIGNATOR: PROTRUDING HUB
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER1.169 INCHES BOTH ENDS IN
TEETH QUANTITY32
BODY STYLEPLAIN, SOLID
BORE STYLESTRAIGHT SPLINE BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.813 INCHES FIRST END IN
FIRST STEP NOMINAL LENGTH0.688 INCHES FIRST END IN
HARDNESS RATING600.0 BRINELL STANDARD NOMINAL OVERALL
STYLE DESIGNATORPROTRUDING HUB
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PITCH DIAMETER2.6650 INCHES MINIMUM AND 2.6670 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
31985Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
E38002-110PC3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 268000PC3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 268000PC3?
268000PC3 is a GEAR,SPUR.
What parts can replace 268000PC3?
There are 2 known substitutes for 268000PC3: 31985, E38002-110PC3. Substitute compatibility should be verified for your specific system.
What is the NSN for 268000PC3?
268000PC3 is cataloged in the U.S. Government catalog under NSN 3020-00-444-4873. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 268000PC3