PartsTable
Technical Data Sheet
Download PDF

268-P-04X02 BO — ADAPTER,STRAIGHT,PIPE TO TUBE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

268-P-04X02 BO: ADAPTER,STRAIGHT,PIPE TO TUBE.

The ADAPTER,STRAIGHT,PIPE TO TUBE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.477 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 0.893 INCHES MINIMUM AND 0.908 INCHES MAXIMUM IN, screw_material: STEEL COMP 303, fastener_length: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-173-2988, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
268-P-04X02 BO
NSN: 4730-01-173-2988
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 30327 — IMPERIAL (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.477 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.893 INCHES MINIMUM AND 0.908 INCHES MAXIMUM IN
screw_materialSTEEL COMP 303
fastener_length1.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
end_item_identificationAMNS UNIT 5 L
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentPASSIVATE
NSN4730-01-173-2988
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 268-P-04X02 BO · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 7
380941Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
9167832Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
B68X4Reference document
Same NSN cross-reference
Reference document — Secondary reference
5189489Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
3160468Reference document
Same NSN cross-reference
Reference document — Secondary reference
38041Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 268-P-04X02 BO?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 268-P-04X02 BO?
268-P-04X02 BO is a ADAPTER,STRAIGHT,PIPE TO TUBE.
What parts can replace 268-P-04X02 BO?
There are 7 known substitutes for 268-P-04X02 BO: 380941, 9167832, B68X4 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 268-P-04X02 BO?
268-P-04X02 BO is cataloged in the U.S. Government catalog under NSN 4730-01-173-2988. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 268-P-04X02 BO