PartsTable
Technical Data Sheet
PartsTable / MRO / 26781
26781 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

AXLE ASSEMBLY,AUTOMOTIVE,DRIVING. Key specifications include body_width: 2.687 INCHES NOMINAL IN, body_height: 3.125 INCHES NOMINAL IN, body_length: 3.375 INCHES NOMINAL IN, inclosure_type: OPEN, mounting_method: THREADED HOLE(S) SINGLE GROUP, frequency_rating: 47.0 HERTZ MINIMUM AND 420.0 HERTZ MAXIMUM SINGLE COMPONENT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0378, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 26781
NSN: 3110-00-100-0378
FSC: 3110
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
body_width2.687 INCHES NOMINAL IN
body_height3.125 INCHES NOMINAL IN
body_length3.375 INCHES NOMINAL IN
inclosure_typeOPEN
mounting_methodTHREADED HOLE(S) SINGLE GROUP
frequency_rating47.0 HERTZ MINIMUM AND 420.0 HERTZ MAXIMUM SINGLE COMPONENT
special_featuresWEAPON SYSTEM ESSENTIAL
nominal_thread_size0.164 INCHES SINGLE GROUP IN
reliability_indicatorNOT ESTABLISHED
end_item_identificationMISC PARTS LIST FOR CGN 0036
thread_quantity_per_inch32 SINGLE GROUP
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) SINGLE GROUP
NSN3110-00-100-0378
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 26781 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
26781Interchangeable
interchangeable cross-reference
interchangeable
150-570GInterchangeable
interchangeable cross-reference
interchangeable
150-570PC195Interchangeable
interchangeable cross-reference
interchangeable
150-570KPC195Interchangeable
interchangeable cross-reference
interchangeable
805-329Interchangeable
interchangeable cross-reference
interchangeable
65780Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 26781?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 26781?
26781 is a AXLE ASSEMBLY,AUTOMOTIVE,DRIVING. It is classified as a MRO (MRO_GENERAL).
What parts can replace 26781?
There are 26 known substitutes for 26781: 26781, 150-570G, 150-570PC195 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 26781?
26781 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0378. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 26781

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026