PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 267530-9
267530-9 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.3125 INCHES NOMINAL IN, overall_width: 0.5625 INCHES NOMINAL IN, alignment_type: RIGID, special_features: GROUND 0D; EXTRA CAPACITY OUTER RING, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-902-2696, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
267530-9
NSN: 3110-00-902-2696
FSC: 3110
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.3125 INCHES NOMINAL IN
overall_width0.5625 INCHES NOMINAL IN
alignment_typeRIGID
special_featuresGROUND 0D; EXTRA CAPACITY OUTER RING
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.5000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-902-2696
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 267530-9 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.3125 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.3125 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.5000 INCHES NOMINAL IN
OVERALL WIDTH0.5625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
ALIGNMENT TYPERIGID
SPECIAL FEATURESGROUND 0D; EXTRA CAPACITY OUTER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
GB59Interchangeable
interchangeable cross-reference
interchangeable
437-24Interchangeable
interchangeable cross-reference
interchangeable
22061Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 267530-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 267530-9?
267530-9 is a BEARING,ROLLER,NEEDLE.
What parts can replace 267530-9?
There are 3 known substitutes for 267530-9: GB59, 437-24, 22061. Substitute compatibility should be verified for your specific system.
Is 267530-9 still available?
267530-9 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 267530-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026