PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 267-18222-1
267-18222-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.140 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 1.470 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-106-1153, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
267-18222-1
NSN: 5330-00-106-1153
FSC: 5330
CAGE: 98329 — FORD AEROSPACE CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.140 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.750 INCHES NOMINAL IN
overall_length1.470 INCHES NOMINAL IN
special_featuresTWENTY SMALL HOLES 0.030 IN. DIA LINED IN TWO ROWS OF SEVEN AND ONE ROW OF SIX,ROW OF SIX ON HORIZONTAL CENTERLINE. ROWS OF SEVEN 0.110 IN. ABOVE AND BELOW HORIZONTAL CENTERLINE IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
center_to_center_distance_between_bolt_holes_along_width0.540 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.218 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-106-1153
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 267-18222-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.218 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
HOLE DIAMETER: 0.140 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.540 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: STEEL OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.218 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH1.470 INCHES NOMINAL IN
HOLE DIAMETER0.140 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.540 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALSTEEL OVERALL
OVERALL WIDTH0.750 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
SPECIAL FEATURESTWENTY SMALL HOLES 0.030 IN. DIA LINED IN TWO ROWS OF SEVEN AND ONE ROW OF SIX,ROW OF SIX ON HORIZONTAL CENTERLINE. ROWS OF SEVEN 0.110 IN. ABOVE AND BELOW HORIZONTAL CENTERLINE IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
1312661Interchangeable
interchangeable cross-reference
interchangeable
1312671Interchangeable
interchangeable cross-reference
interchangeable
1312660Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 267-18222-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 267-18222-1?
267-18222-1 is a GASKET.
What parts can replace 267-18222-1?
There are 3 known substitutes for 267-18222-1: 1312661, 1312671, 1312660. Substitute compatibility should be verified for your specific system.
What is the NSN for 267-18222-1?
267-18222-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-106-1153. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 267-18222-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026