PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 26678
26678 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CYLINDER,ACTUATING,LINEAR is a the manufacturer industrial component. Key specifications include usage_design: RIGHT, usage_location: RIGHT ELBOW, size_designation: LARGE, design_designation: DONJOY, part_name_assigned_by_controlling_agency: BRACE ELBOW SZ LARGE RIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-044-4931, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
26678
NSN: 5315-00-044-4931
FSC: 5315
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
usage_designRIGHT
usage_locationRIGHT ELBOW
size_designationLARGE
special_featuresBRACE, ELBOW; LOCK OUT RANGE OF MOTION 0 TO 120 DEGREES IN INCREMENTS OF 10 DEGREES; WASH/AIR DRY; RIGHT; SIZE: LARGE (OVER 8 INCHES FROM WRIST TO ELBOW CREASE) IN
design_designationDONJOY
part_name_assigned_by_controlling_agencyBRACE ELBOW SZ LARGE RIGHT
NSN5315-00-044-4931
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 26678 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SHOULDER
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: PHOSPHATE OVERALL
•
SHOULDER DIAMETER: 0.748 INCHES MINIMUM AND 0.749 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH7.094 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
MATERIALSTEEL OVERALL
SURFACE TREATMENTPHOSPHATE OVERALL
SHOULDER DIAMETER0.748 INCHES MINIMUM AND 0.749 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
44723Interchangeable
interchangeable cross-reference
interchangeable
44723 PIECE 3Interchangeable
interchangeable cross-reference
interchangeable
26678Interchangeable
interchangeable cross-reference
interchangeable
CM11-NO1-R25-DBDW-L-21Interchangeable
interchangeable cross-reference
interchangeable
11-0180-4-13066Interchangeable
interchangeable cross-reference
interchangeable
A517302Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 26678?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 26678?
26678 is a CYLINDER,ACTUATING,LINEAR.
What parts can replace 26678?
There are 7 known substitutes for 26678: 44723, 44723 PIECE 3, 26678 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 26678?
26678 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-044-4931. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 26678

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026