PartsTable
Technical Data Sheet
Download PDF

2667647-3 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2667647-3: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ, temp_rating: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, special_features: FOR USE IN HYDROCARBON FUELS CONTAINING 30 PCT AROMATICS, center_hole_diameter: 0.294 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN, cross-sectional_height: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN, criticality_code_justification: ABJH. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-997-3281, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2667647-3
NSN: 5331-00-997-3281
NIINs: 009973281, 011288208
FSC: 5331 — O-ring
CAGE: 06848 — HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR) (USA)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ
temp_rating-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
special_featuresFOR USE IN HYDROCARBON FUELS CONTAINING 30 PCT AROMATICS
center_hole_diameter0.294 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
cross-sectional_height0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
criticality_code_justificationABJH
NSN5331-00-997-3281
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2667647-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.294 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.294 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROSILICONE CLASS FQ
SUBSTITUTES & CROSS-REFERENCES 1
953520-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2667647-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2667647-3?
2667647-3 is a O-RING.
What parts can replace 2667647-3?
There is 1 known substitute for 2667647-3: 953520-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 2667647-3?
2667647-3 is cataloged in the U.S. Government catalog under NSN 5331-00-997-3281. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2667647-3