2666553: HOSE ASSEMBLY,NONMETALLIC.
The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: 35.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.343 INCHES MINIMUM AND 0.407 INCHES MAXIMUM IN, connection_style: SWIVEL NUT FLARE FIRST END, outside_diameter: 0.718 INCHES MINIMUM AND 0.782 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 4720-01-017-1267, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| seat_angle | 37.0 DEGREES FIRST END |
| temp_rating | 35.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| connection_type | THREADED INTERNAL TUBE FIRST END |
| inside_diameter | 0.343 INCHES MINIMUM AND 0.407 INCHES MAXIMUM IN |
| connection_style | SWIVEL NUT FLARE FIRST END |
| outside_diameter | 0.718 INCHES MINIMUM AND 0.782 INCHES MAXIMUM IN |
| special_features | INNER CONVEYING TUBE MATERIAL-RUBBER,SYNTHETIC,ETHYLENE PROPYLENE DIENNE-POLY-METHYLENE,B F GOODRICH GRADE 149FS75; THREAD SERIES DESIGNATOR: JIC |
| thread_direction | RIGHT-HAND FIRST END |
| operating_pressure | 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| burst_test_pressure | 800.0 POUNDS PER SQUARE INCH LBS |
| nominal_thread_size | 0.562 INCHES FIRST END IN |
| end_connection_design | STRAIGHT FIRST END |
| NSN | 4720-01-017-1267 |
| MEASURING METHOD AND LENGTH | 22.620 INCHES NOMINAL OVERALL IN |
| TEMP RATING | 35.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| END CONNECTION DESIGN | STRAIGHT FIRST END |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, COMPOSITION AND 2ND LAYER BRAIDED COTTON CORD OR 2ND LAYER BRAIDED RAYON CORD AND 4TH LAYER MOLDED RUBBER, COMPOSITION |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| OUTSIDE DIAMETER | 0.718 INCHES MINIMUM AND 0.782 INCHES MAXIMUM IN |
| OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| END FITTING COMPONENT AND MATERIAL | NIPPLE COPPER ALLOY 360 ALL ENDS |
No substitute or cross-reference records for this part.