PartsTable
Technical Data Sheet
Download PDF

2662485 — FILTER,HIGH PASS-LOW PASS

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2662485: FILTER,HIGH PASS-LOW PASS.

The FILTER,HIGH PASS-LOW PASS is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, design_type: SOLID, end_diameter: 0.3210 INCHES NOMINAL IN, bore_diameter: 0.2650 INCHES NOMINAL IN, overall_height: 0.3690 INCHES NOMINAL IN, style_designator: SEAT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-229-1636, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2662485
NSN: 5340-00-229-1636
NIINs: 002291636, 016239638
FSC: 5340 — Hardware, Commercial
CAGE: 93835 — PARKER HANNIFIN CORPORATION DIV HYDRAULIC SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
design_typeSOLID
end_diameter0.3210 INCHES NOMINAL IN
bore_diameter0.2650 INCHES NOMINAL IN
overall_height0.3690 INCHES NOMINAL IN
style_designatorSEAT
surface_treatmentPASSIVATE
counterbore_length0.0500 INCHES NOMINAL IN
first_step_diameter0.4290 INCHES NOMINAL IN
chamfer_angle_in_deg25.0
counterbore_diameter0.3760 INCHES NOMINAL IN
countersink_diameter0.2850 INCHES NOMINAL IN
NSN5340-00-229-1636
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2662485 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERSINK ANGLE IN DEG: 29.0
•
FIRST STEP DIAMETER: 0.4290 INCHES NOMINAL IN
•
END DIAMETER: 0.3210 INCHES NOMINAL IN
•
COUNTERSINK DIAMETER: 0.2850 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST STEP: 0.2550 INCHES NOMINAL IN
•
DESIGN TYPE: SOLID
•
STYLE DESIGNATOR: SEAT
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.3690 INCHES NOMINAL IN
COUNTERSINK ANGLE IN DEG29.0
FIRST STEP DIAMETER0.4290 INCHES NOMINAL IN
END DIAMETER0.3210 INCHES NOMINAL IN
COUNTERSINK DIAMETER0.2850 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST STEP0.2550 INCHES NOMINAL IN
DESIGN TYPESOLID
STYLE DESIGNATORSEAT
COUNTERBORE LENGTH0.0500 INCHES NOMINAL IN
COUNTERBORE DIAMETER0.3760 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2662485?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2662485?
2662485 is a FILTER,HIGH PASS-LOW PASS. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 2662485?
2662485 is cataloged in the U.S. Government catalog under NSN 5340-00-229-1636. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2662485

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.