PartsTable
Technical Data Sheet
Download PDF

26560003 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

26560003: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 65.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 3.134 INCHES MINIMUM AND 3.148 INCHES MAXIMUM IN, center_hole_diameter: 2.884 INCHES MINIMUM AND 2.898 INCHES MAXIMUM IN, elongation_percentage: 250 MAXIMUM, cross-sectional_height: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-860-2765, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
26560003
NSN: 5330-00-860-2765
FSC: 5330 — Packing and Gasket Materials
CAGE: 03798 — WESTERBEKE CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating65.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter3.134 INCHES MINIMUM AND 3.148 INCHES MAXIMUM IN
center_hole_diameter2.884 INCHES MINIMUM AND 2.898 INCHES MAXIMUM IN
elongation_percentage250 MAXIMUM
cross-sectional_height0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
NSN5330-00-860-2765
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 26560003 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A NOMINAL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
ELONGATION PERCENTAGE: 250 MAXIMUM
•
PERIPHERAL DIAMETER: 3.134 INCHES MINIMUM AND 3.148 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.884 INCHES MINIMUM AND 2.898 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
HARDNESS RATING65.0 SHORE DUROMETER A NOMINAL OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
ELONGATION PERCENTAGE250 MAXIMUM
PERIPHERAL DIAMETER3.134 INCHES MINIMUM AND 3.148 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.884 INCHES MINIMUM AND 2.898 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
12587Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 26560003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 26560003?
26560003 is a PACKING,PREFORMED.
What parts can replace 26560003?
There is 1 known substitute for 26560003: 12587. Substitute compatibility should be verified for your specific system.
What is the NSN for 26560003?
26560003 is cataloged in the U.S. Government catalog under NSN 5330-00-860-2765. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 26560003