PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 265110
265110 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The ROTOR,PUMP is a the manufacturer industrial component. Key specifications include special_features: W/SHAFT, pump_design_control_activity: 07524. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-051-4670, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
265110
NSN: 4720-00-051-4670
FSC: 4720
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
special_featuresW/SHAFT
pump_design_control_activity07524
NSN4720-00-051-4670
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 265110 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BURST TEST PRESSURE: 7000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
MINIMUM INSIDE BENDING RADIUS: 5.500 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
MEDIA FOR WHICH DESIGNED: AIR AND FUEL/OIL, HYDROCARBON AND WATER, FRESH AND WATER, SALT SINGLE RESPONSE
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT
•
SPECIFICATION/STANDARD DATA: 81343-SAE J517,100R5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
OPERATING PRESSURE: 1750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
MATERIAL: RUBBER SYNTHETIC TUBE
TECHNICAL CHARACTERISTICS (FLIS)
BURST TEST PRESSURE7000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MINIMUM INSIDE BENDING RADIUS5.500 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
MEDIA FOR WHICH DESIGNEDAIR AND FUEL/OIL, HYDROCARBON AND WATER, FRESH AND WATER, SALT SINGLE RESPONSE
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT
SPECIFICATION/STANDARD DATA81343-SAE J517,100R5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
OPERATING PRESSURE1750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MATERIALRUBBER SYNTHETIC TUBE
VACUUM IN TORR50.8
INSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
K43Interchangeable
interchangeable cross-reference
interchangeable
10082353Interchangeable
interchangeable cross-reference
interchangeable
5120PL1679699Interchangeable
interchangeable cross-reference
interchangeable
1332Interchangeable
interchangeable cross-reference
interchangeable
D300R/5Interchangeable
interchangeable cross-reference
interchangeable
81AD1679-22Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 265110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 265110?
265110 is a ROTOR,PUMP.
What parts can replace 265110?
There are 35 known substitutes for 265110: K43, 10082353, 5120PL1679699 and 32 more. Substitute compatibility should be verified for your specific system.
Is 265110 still available?
265110 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 265110

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026