PartsTable
Technical Data Sheet
PartsTable / MRO / 2651-157
2651-157 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include width: 2.880 INCHES NOMINAL IN, length: 4.620 INCHES NOMINAL IN, material: PLASTIC, POLYETHYLENE (PP), body_length: 0.562 INCHES MAXIMUM IN, inside_angle: 3.0 DEGREES NOMINAL, inside_width: 3.770 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-354-8520, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2651-157
NSN: 5340-00-354-8520
FSC: 5340
CAGE: 06848 — HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR) (USA)
SPECIFICATIONS
width2.880 INCHES NOMINAL IN
length4.620 INCHES NOMINAL IN
materialPLASTIC, POLYETHYLENE (PP)
body_length0.562 INCHES MAXIMUM IN
inside_angle3.0 DEGREES NOMINAL
inside_width3.770 INCHES NOMINAL IN
body_diameter0.234 INCHES MAXIMUM IN
corner_radius0.380 INCHES NOMINAL IN
hole_diameter0.230 INCHES NOMINAL IN
inside_length2.300 INCHES NOMINAL IN
terminal_typeWIRE LEAD
body_thickness0.080 INCHES NOMINAL IN
NSN5340-00-354-8520
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2651-157 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 4.125 INCHES NOMINAL IN
•
INSIDE WIDTH: 3.770 INCHES NOMINAL IN
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 0.150 INCHES NOMINAL IN
•
BODY THICKNESS: 0.080 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.080 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.230 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: RECTANGLE, FOUR HOLES
•
INSIDE LENGTH: 2.300 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE BETWEEN HOLES ALONG LENGTH4.125 INCHES NOMINAL IN
INSIDE WIDTH3.770 INCHES NOMINAL IN
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.150 INCHES NOMINAL IN
BODY THICKNESS0.080 INCHES NOMINAL IN
FLANGE THICKNESS0.080 INCHES NOMINAL IN
HOLE DIAMETER0.230 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLERECTANGLE, FOUR HOLES
INSIDE LENGTH2.300 INCHES NOMINAL IN
INSIDE ANGLE3.0 DEGREES NOMINAL
SECURING DEVICE TYPESPRING CLIP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
2651-157Interchangeable
interchangeable cross-reference
interchangeable
2651-157-00Interchangeable
interchangeable cross-reference
interchangeable
992651-157Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2651-157?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2651-157?
2651-157 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2651-157?
There are 3 known substitutes for 2651-157: 2651-157, 2651-157-00, 992651-157. Substitute compatibility should be verified for your specific system.
What is the NSN for 2651-157?
2651-157 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-354-8520. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2651-157

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026