PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2651-12L1
2651-12L1 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC TUBE, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, vacuum_in_torr: 50.8, inside_diameter: 0.620 INCHES NOMINAL IN, outside_diameter: 1.080 INCHES NOMINAL IN, operating_pressure: 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-288-9870, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2651-12L1
NSN: 4720-00-288-9870
FSC: 4720
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
vacuum_in_torr50.8
inside_diameter0.620 INCHES NOMINAL IN
outside_diameter1.080 INCHES NOMINAL IN
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure6000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
end_item_identificationGRUMMAN A10 AIRCRAFT
inside_surface_conditionSMOOTH
media_for_which_designedAIR AND FUEL/OIL, HYDROCARBON AND WATER, FRESH AND WATER, SALT SINGLE RESPONSE
cross-sectional_shape_styleROUND
nondefinitive_spec/std_data12 SIZE
NSN4720-00-288-9870
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 2651-12L1 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM INSIDE BENDING RADIUS: 6.500 INCHES IN
•
OUTSIDE DIAMETER: 1.080 INCHES NOMINAL IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
OPERATING PRESSURE: 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
VACUUM IN TORR: 50.8
•
NONDEFINITIVE SPEC/STD DATA: 12 SIZE
•
SPECIFICATION/STANDARD DATA: 81343-SAE J517,100R5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM INSIDE BENDING RADIUS6.500 INCHES IN
END ITEM IDENTIFICATIONGRUMMAN A10 AIRCRAFT
OUTSIDE DIAMETER1.080 INCHES NOMINAL IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
OPERATING PRESSURE1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
VACUUM IN TORR50.8
NONDEFINITIVE SPEC/STD DATA12 SIZE
SPECIFICATION/STANDARD DATA81343-SAE J517,100R5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
MEDIA FOR WHICH DESIGNEDAIR AND FUEL/OIL, HYDROCARBON AND WATER, FRESH AND WATER, SALT SINGLE RESPONSE
MATERIALRUBBER SYNTHETIC TUBE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
22512Interchangeable
interchangeable cross-reference
interchangeable
F112Interchangeable
interchangeable cross-reference
interchangeable
212-00064Interchangeable
interchangeable cross-reference
interchangeable
F10J75RInterchangeable
interchangeable cross-reference
interchangeable
D-602Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 41Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2651-12L1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2651-12L1?
2651-12L1 is a RESISTOR,FIXED,WIRE WOUND.
What parts can replace 2651-12L1?
There are 22 known substitutes for 2651-12L1: 22512, F112, 212-00064 and 19 more. Substitute compatibility should be verified for your specific system.
Is 2651-12L1 still available?
2651-12L1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2651-12L1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026