PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2650-2275GP2 ITEM 40

2650-2275GP2 ITEM 40 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN, overall_width: 0.7460 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-991-0913, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2650-2275GP2 ITEM 40
NSN: 3110-00-991-0913
FSC: 3110
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
overall_width0.7460 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0005 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
overall_outside_diameter3.3463 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN
internal_fit-up_designationTIGHT
nondefinitive_spec/std_data111 TYPE AND 7 CLASS
NSN3110-00-991-0913
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2650-2275GP2 ITEM 40 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: TIGHT
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
LOAD DIRECTION: RADIAL
•
INTERNAL CLEARANCE: 0.0005 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONTIGHT
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
LOAD DIRECTIONRADIAL
INTERNAL CLEARANCE0.0005 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
NONDEFINITIVE SPEC/STD DATA111 TYPE AND 7 CLASS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
MILB17931BInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
10264PC10InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1515668PC4InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
6208-7077V4InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
208TMT58VBInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
6208W1BInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2650-2275GP2 ITEM 40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2650-2275GP2 ITEM 40?
2650-2275GP2 ITEM 40 is a BEARING,BALL,ANNULAR.
What parts can replace 2650-2275GP2 ITEM 40?
There are 34 known substitutes for 2650-2275GP2 ITEM 40: MILB17931B, 10264PC10, 1515668PC4 and 31 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2650-2275GP2 ITEM 40?
2650-2275GP2 ITEM 40 is cataloged in the Federal Logistics Information System under NSN 3110-00-991-0913. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2650-2275GP2 ITEM 40

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026