PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 265-0095-9901
265-0095-9901 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, overall_length: 36.375 INCHES NOMINAL IN, cross-sectional_thickness: 0.406 INCHES NOMINAL IN, material_document_and_classification: Z003-3GR-2,FSCM 80704 MFR REF SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-890-2844, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
265-0095-9901
NSN: 5330-00-890-2844
FSC: 5330
CAGE: 80704 — HUBBELL HARVEY INC LIGHTING DIV (USA)
SPECIFICATIONS
materialRUBBER OVERALL
overall_length36.375 INCHES NOMINAL IN
cross-sectional_thickness0.406 INCHES NOMINAL IN
material_document_and_classificationZ003-3GR-2,FSCM 80704 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-890-2844
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 265-0095-9901 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: Z003-3GR-2,FSCM 80704 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONZ003-3GR-2,FSCM 80704 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL THICKNESS0.406 INCHES NOMINAL IN
OVERALL LENGTH36.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
J55Interchangeable
interchangeable cross-reference
interchangeable
FANCYInterchangeable
interchangeable cross-reference
interchangeable
SCE55Interchangeable
interchangeable cross-reference
interchangeable
137-012-9001Interchangeable
interchangeable cross-reference
interchangeable
613SA246-1Interchangeable
interchangeable cross-reference
interchangeable
JS-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 265-0095-9901?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 265-0095-9901?
265-0095-9901 is a GASKET.
What parts can replace 265-0095-9901?
There are 9 known substitutes for 265-0095-9901: J55, FANCY, SCE55 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 265-0095-9901?
265-0095-9901 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-890-2844. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 265-0095-9901

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026