Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM, material: PLASTIC TETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT RETAINER, peripheral_diameter: 0.864 INCHES NOMINAL IN, center_hole_diameter: 0.688 INCHES NOMINAL IN, distance_between_ends: 0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-168-4581, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
2640-085PC92
NSN:5330-00-168-4581 FSC:5330 CAGE:96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
angle
25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
material
PLASTIC TETRAFLUOROETHYLENE OVERALL
joint_type
SCARF-BUTT RETAINER
peripheral_diameter
0.864 INCHES NOMINAL IN
center_hole_diameter
0.688 INCHES NOMINAL IN
distance_between_ends
0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
cross-sectional_thickness
0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
cross-sectional_shape_style
SQUARE
material_document_and_classification
SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
reference_number_differentiating_characteristics
MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACITVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
NSN
5330-00-168-4581
COMPONENT DIAGRAM
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.688 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 0.864 INCHES NOMINAL IN
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
DISTANCE BETWEEN ENDS: 0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACITVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
•
JOINT TYPE: SCARF-BUTT RETAINER
•
CROSS-SECTIONAL THICKNESS: 0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER
0.688 INCHES NOMINAL IN
PERIPHERAL DIAMETER
0.864 INCHES NOMINAL IN
ANGLE
25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
DISTANCE BETWEEN ENDS
0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACITVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
JOINT TYPE
SCARF-BUTT RETAINER
CROSS-SECTIONAL THICKNESS
0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2640-085PC92?
2640-085PC92 is a RETAINER,PACKING.
What parts can replace 2640-085PC92?
There are 9 known substitutes for 2640-085PC92: 255753PC57, 26000-13, 982185 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2640-085PC92?
2640-085PC92 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-168-4581. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.