PartsTable
Technical Data Sheet
Download PDF

2639606 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

2639606: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.1250 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-790-4874, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2639606
NSN: 3110-00-790-4874
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 06848 — HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR) (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.1250 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
special_featuresBEARING FURNISHED WITH RUST INHIBITOR /FOR STORAGE)
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
overall_outside_diameter0.5000 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.5
NSN3110-00-790-4874
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2639606 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL CLEARANCE: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
INTERNAL CLEARANCE0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.1250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.5000 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESBEARING FURNISHED WITH RUST INHIBITOR /FOR STORAGE)
STANDARD TOLERANCE DESIGNATIONABEC NO.5
SUBSTITUTES & CROSS-REFERENCES 1
SR1885DC3K58Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 2639606?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2639606?
2639606 is a BEARING,BALL,ANNULAR.
What parts can replace 2639606?
There is 1 known substitute for 2639606: SR1885DC3K58. Substitute compatibility should be verified for your specific system.
What is the NSN for 2639606?
2639606 is cataloged in the U.S. Government catalog under NSN 3110-00-790-4874. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2639606