PartsTable
Technical Data Sheet
PartsTable / MRO / 26333
26333 ✓ Verified by PartsTable
Clementoni · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a Clementoni industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, body_length: 0.700 INCHES MAXIMUM IN, inclosure_type: FULLY INCLOSED, overall_length: 4.000 INCHES NOMINAL IN, mounting_method: TERMINAL SINGLE GROUP, frequency_rating: 13.0 KILOHERTZ NOMINAL SINGLE COMPONENT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-459-5502, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 26333
NSN: 5330-00-459-5502
FSC: 5330
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
body_length0.700 INCHES MAXIMUM IN
flute_quantity8
inclosure_typeFULLY INCLOSED
overall_length4.000 INCHES NOMINAL IN
mounting_methodTERMINAL SINGLE GROUP
frequency_rating13.0 KILOHERTZ NOMINAL SINGLE COMPONENT
special_features9/64 IN X 60MM MM
design_designationHUDSON
body_outside_diameter1.300 INCHES MAXIMUM IN
electrical_resistance2.700 KILOHMS
head_overall_diameter16.000 MILLIMETERS MM
NSN5330-00-459-5502
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 26333 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
45-2716Interchangeable
interchangeable cross-reference
interchangeable
VM85-1239Interchangeable
interchangeable cross-reference
interchangeable
15-1007Interchangeable
interchangeable cross-reference
interchangeable
010031-005Interchangeable
interchangeable cross-reference
interchangeable
MIL-W-16878/1Interchangeable
interchangeable cross-reference
interchangeable
3071-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 26333?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 26333?
26333 is a RESISTOR,FIXED,WIRE WOUND manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 26333?
There are 16 known substitutes for 26333: 45-2716, VM85-1239, 15-1007 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 26333?
26333 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-459-5502. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 26333

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026