PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 262566PC15
262566PC15 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.618 INCHES MINIMUM AND 0.632 INCHES MAXIMUM IN, pin_overall_diameter: 0.0860 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL, first_end_taper_length: 0.009 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-271-4340, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
262566PC15
NSN: 5315-00-271-4340
FSC: 5315
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length0.618 INCHES MINIMUM AND 0.632 INCHES MAXIMUM IN
pin_overall_diameter0.0860 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.009 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-271-4340
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 262566PC15 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER LENGTH: 0.009 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL DIAMETER: 0.0860 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.618 INCHES MINIMUM AND 0.632 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END STYLECHAMFERED
FIRST END TAPER LENGTH0.009 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
MATERIALSTEEL OVERALL
PIN OVERALL DIAMETER0.0860 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.618 INCHES MINIMUM AND 0.632 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
8953Interchangeable
Spacer,soleno1d Val
interchangeable
419198Interchangeable
interchangeable cross-reference
interchangeable
MILC5584STYLE1Interchangeable
interchangeable cross-reference
interchangeable
580Interchangeable
interchangeable cross-reference
interchangeable
1M146-1Interchangeable
interchangeable cross-reference
interchangeable
346243PC6Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 262566PC15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 262566PC15?
262566PC15 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 262566PC15?
There are 8 known substitutes for 262566PC15: 8953, 419198, MILC5584STYLE1 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 262566PC15?
262566PC15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-271-4340. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 262566PC15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026