PartsTable
Technical Data Sheet
Download PDF

262415 — REACTOR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

262415: REACTOR.

The REACTOR is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, body_width: 0.760 INCHES MAXIMUM IN, body_height: 0.905 INCHES MAXIMUM IN, body_length: 0.880 INCHES MAXIMUM IN, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, rating_method: ELECTRICAL SINGLE COMPONENT SINGLE WINDING. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-099-8453, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
262415
NSN: 5330-00-099-8453
NIINs: 000998453, 008155573, 009216021
FSC: 5330 — Packing and Gasket Materials
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
body_width0.760 INCHES MAXIMUM IN
body_height0.905 INCHES MAXIMUM IN
body_length0.880 INCHES MAXIMUM IN
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
inclosure_typeHERMETICALLY SEALED
overall_height1.435 INCHES NOMINAL IN
hardness_rating75.0 SHORE DUROMETER A NOMINAL OVERALL
inductance_typeFIXED
mounting_methodTHREADED STUD(S) SINGLE GROUP
frequency_rating46.0 HERTZ NOMINAL SINGLE COMPONENT
NSN5330-00-099-8453
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 262415 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL OVERALL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
PERIPHERAL DIAMETER: 3.512 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 3.219 INCHES MINIMUM AND 3.249 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
TECHNICAL CHARACTERISTICS
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL OVERALL
ELONGATION PERCENTAGE125 MAXIMUM
PERIPHERAL DIAMETER3.512 INCHES NOMINAL IN
SPECIAL FEATURESCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
CENTER HOLE DIAMETER3.219 INCHES MINIMUM AND 3.249 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
MS9388-236Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 262415?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 262415?
262415 is a REACTOR.
What parts can replace 262415?
There is 1 known substitute for 262415: MS9388-236. Substitute compatibility should be verified for your specific system.
What is the NSN for 262415?
262415 is cataloged in the U.S. Government catalog under NSN 5330-00-099-8453. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 262415