PartsTable
Technical Data Sheet
PartsTable / O-RING / 2620-906X10PC62
2620-906X10PC62 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, outside_diameter: 0.285 INCHES NOMINAL IN, center_hole_diameter: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-114-2059, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2620-906X10PC62
NSN: 5331-00-114-2059
FSC: 5331 — O-RING
CAGE: 28968 — CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. DBA HOKE GYROLOK (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
outside_diameter0.285 INCHES NOMINAL IN
center_hole_diameter0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-114-2059
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2620-906X10PC62 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
OUTSIDE DIAMETER: 0.285 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER FLUOROCARBON CLASS FPM
OUTSIDE DIAMETER0.285 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
MS28775-007Interchangeable
interchangeable cross-reference
interchangeable
M28775-007Interchangeable
interchangeable cross-reference
interchangeable
04273-3Interchangeable
interchangeable cross-reference
interchangeable
2-007E540-8Interchangeable
interchangeable cross-reference
interchangeable
AMS7276Interchangeable
interchangeable cross-reference
interchangeable
2-007 E540-80Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2620-906X10PC62?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2620-906X10PC62?
2620-906X10PC62 is a O-RING.
What parts can replace 2620-906X10PC62?
There are 14 known substitutes for 2620-906X10PC62: MS28775-007, M28775-007, 04273-3 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2620-906X10PC62?
2620-906X10PC62 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-114-2059. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2620-906X10PC62

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026