PartsTable
Technical Data Sheet
Download PDF

26118 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

26118: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: RUBBER SYNTHETIC OR STEEL, case_style: RECESSED, cone_width: 0.7450 INCHES NOMINAL IN, seal_width: 0.313 INCHES NOMINAL IN, temp_rating: -65.0 CELSIUS AND 225.0 CELSIUS DEGC, corner_shape: SQUARE INSIDE LEFT CORNER. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3547, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 26118
NSN: 3110-00-100-3547
NIINs: 001003547, 001035609, 006879933, 013999894, 015268029, 016422379, 016479326, 016702011, 016784562, 016803009
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OR STEEL
case_styleRECESSED
cone_width0.7450 INCHES NOMINAL IN
seal_width0.313 INCHES NOMINAL IN
temp_rating-65.0 CELSIUS AND 225.0 CELSIUS DEGC
corner_shapeSQUARE INSIDE LEFT CORNER
flange_width0.0781 INCHES NOMINAL IN
bore_diameter1.1805 INCHES NOMINAL IN
overall_length18.000 INCHES NOMINAL IN
capacity_rating1200.0 POUNDS MAXIMUM LBS
special_featuresOVERSEAS METRIC 25.4MM X 19.05MM MM
style_designatorOPEN END SINGLE HEAD RACK AND WORM ADJUSTMENT
NSN3110-00-100-3547
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 26118 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
•
CONE WIDTH: 0.7450 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.1805 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0625 INCHES NOMINAL IN
CONE WIDTH0.7450 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.1805 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 26118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 26118?
26118 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 26118?
26118 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3547. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 26118

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.