PartsTable
Technical Data Sheet
Download PDF

260P1-103 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

260P1-103: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES/SLOTS, body_width: 0.190 INCHES NOMINAL IN, body_height: 0.315 INCHES NOMINAL IN, body_length: 1.250 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.058 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-688-4124, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 260P1-103
NSN: 5905-00-688-4124
NIINs: 006884124, 008994089, 010674617
FSC: 5905 — Resistor
CAGE: 80294 — BOURNS INSTRUMENTS INC (USA)
SPECIFICATIONS
body_styleRECTANGULAR W/MOUNTING HOLES/SLOTS
body_width0.190 INCHES NOMINAL IN
body_height0.315 INCHES NOMINAL IN
body_length1.250 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.058 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
cubic_measure0.075 CUBIC INCHES
overall_width0.190 INCHES NOMINAL IN
overall_height0.815 INCHES NOMINAL IN
overall_length1.308 INCHES NOMINAL IN
shaft_diameter0.115 INCHES NOMINAL IN
NSN5905-00-688-4124
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN 260P1-103 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
ELECTRICAL RESISTANCE PER SECTION: 10.000 KILOHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 175.0 SINGLE SECTION
•
SECTION QUANTITY: 1
•
MOUNTING FACILITY QUANTITY: 2
•
SHAFT DIAMETER: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
BODY STYLE: RECTANGULAR W/MOUNTING HOLES/SLOTS
•
TERMINAL LENGTH: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.780 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN
ELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER175.0 SINGLE SECTION
SECTION QUANTITY1
MOUNTING FACILITY QUANTITY2
SHAFT DIAMETER0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
TERMINAL LENGTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MOUNTING METHODUNTHREADED HOLE(S)
BODY WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
240-1355P10Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 260P1-103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 260P1-103?
260P1-103 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 260P1-103?
There is 1 known substitute for 260P1-103: 240-1355P10. Substitute compatibility should be verified for your specific system.
What is the NSN for 260P1-103?
260P1-103 is cataloged in the U.S. Government catalog under NSN 5905-00-688-4124. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 260P1-103

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.