PartsTable
Technical Data Sheet
Download PDF

2607-170-0 — DIAL,CONTROL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

2607-170-0: DIAL,CONTROL.

The DIAL,CONTROL is a the manufacturer industrial component. Key specifications include height: 0.910 INCHES NOMINAL IN, material: STEEL DIAL, drive_type: DIRECT AND GEAR, scale_type: LINEAR ALL SCALES, drive_ratio: 1.0 SINGLE AND 15.0 SINGLE, outside_diameter: 0.880 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5355-01-042-0550, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2607-170-0
NSN: 5355-01-042-0550
FSC: 5355 — Knobs and Pointers
CAGE: 17338 — HIGH PRESSURE EQUIPMENT INC DBA HYPRES EQUIPMENT (USA)
SPECIFICATIONS
height0.910 INCHES NOMINAL IN
materialSTEEL DIAL
drive_typeDIRECT AND GEAR
scale_typeLINEAR ALL SCALES
drive_ratio1.0 SINGLE AND 15.0 SINGLE
outside_diameter0.880 INCHES NOMINAL IN
style_designatorROUND W/KNOB
attachment_methodHOLE AND SETSCREWS
surface_treatmentCHROMIUM DIAL
nominal_thread_size0.086 INCHES SCREW HOLE IN
knob_portion_diameter0.547 INCHES NOMINAL IN
setscrew_hole_quantity2
NSN5355-01-042-0550
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available DIAL,CONTROL TITLE COMPONENT PN 2607-170-0 MFR DIAL,CONTROL
KEY FEATURES
•
POSITIONING MECHANISM TYPE: KNOB DUAL
•
DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE: 0.090 INCHES NOMINAL IN
•
KNOB PORTION DIAMETER: 0.547 INCHES NOMINAL IN
•
DRIVE TYPE: DIRECT AND GEAR
•
DRIVE RATIO: 1.0 SINGLE AND 15.0 SINGLE
•
STYLE DESIGNATOR: ROUND W/KNOB
•
OUTSIDE DIAMETER: 0.880 INCHES NOMINAL IN
•
SETSCREW HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
POSITIONING MECHANISM TYPEKNOB DUAL
DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE0.090 INCHES NOMINAL IN
KNOB PORTION DIAMETER0.547 INCHES NOMINAL IN
DRIVE TYPEDIRECT AND GEAR
DRIVE RATIO1.0 SINGLE AND 15.0 SINGLE
STYLE DESIGNATORROUND W/KNOB
OUTSIDE DIAMETER0.880 INCHES NOMINAL IN
SETSCREW HOLE QUANTITY2
NOMINAL THREAD SIZE0.086 INCHES SCREW HOLE IN
SCALE TYPELINEAR ALL SCALES
SUBSTITUTES & CROSS-REFERENCES 2
2607SSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0431C0012Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2607-170-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2607-170-0?
2607-170-0 is a DIAL,CONTROL.
What parts can replace 2607-170-0?
There are 2 known substitutes for 2607-170-0: 2607S, 0431C0012. Substitute compatibility should be verified for your specific system.
What is the NSN for 2607-170-0?
2607-170-0 is cataloged in the U.S. Government catalog under NSN 5355-01-042-0550. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2607-170-0

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.