260376MF3 — SWITCH,ROTARY

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

260376MF3: SWITCH,ROTARY.

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include shaft_type: ROUND, FLATTED SINGLE ACTUATOR, flat_height: 0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM SINGLE ACTUATOR IN, shaft_length: 0.875 INCHES NOMINAL SINGLE ACTUATOR IN, thread_class: 2A SINGLE MOUNTING FACILITY A, overall_width: 1.980 INCHES MAXIMUM IN, pole_quantity: 1 EACH SECTION REAR. This part is cataloged in the U.S.

Government catalog under NSN 5930-00-159-7300, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 260376MF3

NSN: 5930-00-159-7300
FSC: 5930 — Switches
CAGE: 76854 — ELECTRO SWITCH CORP. DBA OAK GRISGSBY DIV ELECTROSWITCH (USA)

SPECIFICATIONS

shaft_type	ROUND, FLATTED SINGLE ACTUATOR
flat_height	0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM SINGLE ACTUATOR IN
shaft_length	0.875 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class	2A SINGLE MOUNTING FACILITY A
overall_width	1.980 INCHES MAXIMUM IN
pole_quantity	1 EACH SECTION REAR
terminal_type	TAB, SOLDER LUG
thread_length	0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_height	2.380 INCHES MAXIMUM IN
overall_length	2.611 INCHES MAXIMUM IN
shaft_diameter	0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN
throw_quantity	20 EACH SECTION REAR
NSN	5930-00-159-7300

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR

•

SHAFT DIAMETER: 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN

•

SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL

•

NONTURN DEVICE RADIUS: 0.531 INCHES NOMINAL AT 12:00 OCLOCK IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

FIRST FLAT LENGTH: 0.375 INCHES NOMINAL SINGLE ACTUATOR IN

•

DETENT ROTATIONAL TORQUE RANGE: +2.000 TO 6.000 INCH-POUNDS SINGLE ACTUATOR IN

TECHNICAL CHARACTERISTICS

SHAFT TYPE	ROUND, FLATTED SINGLE ACTUATOR
OVERALL HEIGHT	2.380 INCHES MAXIMUM IN
SHAFT DIAMETER	0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR IN
SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
NONTURN DEVICE RADIUS	0.531 INCHES NOMINAL AT 12:00 OCLOCK IN
TERMINAL TYPE	TAB, SOLDER LUG
FIRST FLAT LENGTH	0.375 INCHES NOMINAL SINGLE ACTUATOR IN
DETENT ROTATIONAL TORQUE RANGE	+2.000 TO 6.000 INCH-POUNDS SINGLE ACTUATOR IN
CONTACT LOAD CURRENT RATING	250.0 MILLIAMPERES RESISTIVE LOAD HIGHEST AC VOLTAGE RATING AT SEA LEVEL
CONTACT LOAD CURRENT RATING	500.0 MILLIAMPERES RESISTIVE LOAD AND 50.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL

OTHER ITEMS IN FSC 5930 — Switches

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5930-00-000-0117 5930-00-001-1407 5930-00-001-1890 5930-00-001-2571 5930-00-001-2575 5930-00-001-2580 5930-00-001-2608 5930-00-001-2609

SUBSTITUTES & CROSS-REFERENCES 1

2545800-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 260376MF3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 260376MF3?

260376MF3 is a SWITCH,ROTARY. It is classified as a MRO (MRO_GENERAL).

What parts can replace 260376MF3?

There is 1 known substitute for 260376MF3: 2545800-1. Substitute compatibility should be verified for your specific system.

What is the NSN for 260376MF3?

260376MF3 is cataloged in the U.S. Government catalog under NSN 5930-00-159-7300. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

260376MF3 — SWITCH,ROTARY

Request a Quote — 260376MF3